In the use of 802.1X access control,
which three protocols are allowed through the switch port before authentication takes place? ()
A. STP
B. CDP
C. EAP MD5
D. TACACS+
E. EAP-over-LAN
F. protocols not filtered by an ACL
您可能感興趣的試卷
你可能感興趣的試題
The DAI feature has been implemented in the Company switched LAN.
Which three statements are true about the dynamic ARP inspection (DAI) feature? ()
A. DAI can be performed on ingress ports only.
B. DAI can be performed on both ingress and egress ports.
C. DAI is supported on access ports, trunk ports, EtherChannel ports, and private VLAN ports.
D. DAI should be enabled on the root switch for particular VLANs only in order to secure the ARP caches of hosts in the domain.
E. DAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted.
F. DAI is supported on access and trunk ports only.
pany has implemented 802.1X authentication as a security enhancement.
Which statement is true about 802.1x port-based authentication?()
A. TACACS+ is the only supported authentication server type.
B. If a host initiates the authentication process and does not receive a response, it assumes it is not authorized.
C. RADIUS is the only supported authentication server type.
D. Before transmitting data, an 802.1x host must determine the authorization state of the switch.
E. Hosts are required to havea 802.1x authentication client or utilize PPPoE.
F. None of the other alternatives apply.
Refer to the exhibit.
How will interface FastEthernnet0/1 respond when an 802.1x-enabled client connects to the port? ()
A. The switch will uniquely authorize the client by using the client MAC address.
B. The switch will cause the port to remain in the unauthorized state, ignoring all attempts by the client to authenticate.
C. The switch port will disable 802.1x port-based authentication and cause the port to transition to the authorized state without any further authentication exchange.
D. The switch port will enable 802.1x port-based authentication and begin relaying authentication messages between the client and the authentication server.
An attacker is launching a DoS attack on the Company network using a hacking tool designed to exhaust the IP address space available from the DHCP servers for a period of time.
Which procedure would best defend against this type of attack? ()
A. Configure only trusted interfaces with root guard.
B. Implement private VLANs (PVLANs) to carry only user traffic.
C. Implement private VLANs (PVLANs) to carry only DHCP traffic.
D. Configure only untrusted interfaces with root guard.
E. Configure DHCP spoofing on all ports that connect untrusted clients.
F. Configure DHCP snooping only on ports that connect trusted DHCP servers.
G. None of the other alternatives apply
The Company is concerned about Layer 2 security threats.
Which statement is true about these threats? ()
A. MAC spoofing attacks allow an attacking device to receive frames intended for a different network host.
B. Port scanners are the most effective defense against dynamic ARP inspection.
C. MAC spoofing, in conjunction with ARP snooping, is the most effective counter-measure against reconnaissance attacks that use dynamic ARP inspection (DAI) to determine vulnerable attack points.
D. Dynamic ARP inspection in conjunction with ARP spoofing can be used to counter DHCP snooping attacks.
E. DHCP snooping sends unauthorized replies to DHCP queries.
F. ARP spoofing can be used to redirect traffic to counter dynamic ARP inspection.
G. None of the other alternatives apply.
Refer to the exhibit. Port security has been configured on the switch port Fa0/5.
What would happen if another device is connected to the port after the maximum number of devices has been reached, even if one or more of the original MAC addresses are inactive?()
A. The port will permit the new MAC address because one or more of the original MAC addresses are inactive.
B. The port will permit the new MAC address because one or more of the original MAC addresses will age out.
C. Because the new MAC address is not configured on the port, the port will not permit the new MAC address.
D. Although one or more of the original MAC addresses are inactive, the port will not permit the new MAC address.
Refer to the exhibit.
What is the problem with this configuration?()
A. Spanning tree PortFast cannot be configured on a port where a voice VLAN is configured.
B. Sticky secure MAC addresses cannot be used on a port when a voice VLAN is configured.
C. Spanning tree PortFast cannot be configured on a port when a sticky secure MAC address is used.
D. The switch port must be configured as a trunk.
You need to configure port security on switch R1.
Which two statements are true about this technology? ()
A. Port security can be configured for ports supporting VoIP.
B. With port security configured, four MAC addresses are allowed by default.
C. The network administrator must manually enter the MAC address for each device in order for the switch to allow connectivity.
D. Withsecurity configured, only one MAC addresses is allowed by default.
E. Port security cannot be configured for ports supporting VoIP.
Refer to the exhibit. Based on the running configuration that is shown for interface FastEthernet0/2,
what two conclusions can be deduced?()
A. Connecting a host with MAC address 0000.0000.4147 will move interface FastEthernet0/2 into error disabled state.
B. The host with address 0000.0000.4141 is removed from the secure address list after 5 seconds of inactivity.
C. The sticky secure MAC addresses are treated as static secure MAC addresses after the running configuration is saved to the startup configuration and the switch is restarted.
D. Interface FastEthernet0/2 is a voice VLAN port.
E. The host with address 0000.0000.000b is removed from the secure address list after 300 seconds.
Refer to the exhibit.
Which interface or interfaces on switch SW_A can have the port security feature enabled?()
A. Ports 0/1 and 0/2
B. The trunk port 0/22 and the EtherChannel ports
C. Ports 0/1, 0/2 and 0/3
D. Ports 0/1, 0/2, 0/3, the trunk port 0/22 and the EtherChannel ports
E. Port 0/1
F. Ports 0/1, 0/2, 0/3 and the trunk port 0/22
最新試題
Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port:00:06:34: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/5 (not half duplex), with SW_A FastEthernet0/4 (half duplex) , with TBA05071417(Cat6K-B) 0/4 (half duplex). What would be the possible outcome of the problem?()
During routine maintenance, G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ? ()
Refer to the exhibit. What will happen when one more user is connected to interface FastEthernet 5/1? ()
Refer to the exhibit. All network links are FastEthernet. Although there is complete connectivity throughout the network, Front Line users have been complaining that they experience slower network performance when accessing the server farm than the Reception office experiences. Based on the exhibit, which two statements are true?()
Which statement is correct about the use of the virtual interface on a WLC ?()
What will occur when a nonedge switch port that is configured for Rapid Spanning Tree does not receive a BPDU from its neighbor for three consecutive hello time intervals?()
Based on the show spanning-tree vlan 200 output shown in the exhibit, which two statements about the STP process for VLAN 200 are true? ()
During routine maintenance, it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time, DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ? ()
Refer to the exhibit. For what purpose is the command show ip cef used?()
What is the configured priority value of the Vlan105’s group on DS2 ?()