On a cisco aironet 802.11 a/b/g wireless lan client adapter， the status led and activity led are alternating on and off.
What does this indicate？（）
A.the client card is not associated to the network.
B.the client card has awakened from power-save mode.
C.the driver has been installed incorrectly.
D.the client card has failed.
您可能感興趣的試卷
你可能感興趣的試題
You have very few cisco 7920 wireless ip phones on your network， but lots of wireless laptops. You want to increase the bandwidth available for the laptops by decreasing the bandwidth
reserved for the cisco 7920 phones.
What is the lowest percentage of voice-allocated bandwidth you can select on the wlan controller？（）
A.55 percent
B.75 percent
C.40 percent
D.25 percent
A.windows 2000 sp4
B.windows server 2003
C.solaris 10
D.vista
E.windows xp pro
Your customer has deployed a cisco wireless location appliance within its warehouse
environment. however， employees there have been experiencing problems when tracking objects using active rfid tags. you use an access point scan to determine if the location appliance has been deployed correctly.
Making which change to warehouse deployment location services will most likely correct the problem？（）
A.ensure channels are deployed such that they do not overlap
B.allow for the automatic containment of rogue access points
C.ensure each area is covered by a minimum of three access points
D.ensure a minimum rssi value of -50
A.4
B.32
C.8
D.16
A cisco 4404 wlan controller is being connected to a cisco 6500 catalyst series switch.
How would you interconnect and configure lag for connectivity and ensure redundancy？（）
A.all four ports from the cisco wlc terminated to the same catalyst gigabit module and channel group.
B.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 10 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 10.
C.all four ports from the cisco wlc terminated to the same catalyst gigabit module using two channel groups.
D.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 20 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 40.
A.50 feet [15 meters]
B.200 feet [60 meters]
C.150 feet [45 meters]
D.100 feet [30 meters]
A.gtc
B.md5
C.ms-chap v2
D.pap
A.develops a training plan and delivers via a custom workshop or e-learning
B.helps improve the performance and functionality of the infrastructure operations and network management system
C.reduces the risk of downtime caused by facilities-related problems
D.provides a step-by-step plan detailing the installation and service-commission requirement tasks to be staged in a controlled implementation environment that emulates a customer network
A.force infrastructure devices to associate only to this ssid
B.set infrastructure ssid
C.multiple bssid
D.set data beacon rate
E.enable ip redirection on this ssid
One of your customers has decided to deploy location-based services in addition to existing wireless services. the customer requires that the additional access points to be deployed in
monitor-only modE.
The most likely reason for this requirement is that the customer has which of these existing wireless devices？（）
A.data collection
B.802.11b/g voip
C.802.11b and g clients
D.rfid tags
最新試題
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port？（）
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add？（）
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off.What does this indicate？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped.What may cause this problem？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）