A.windows 2000 sp4
B.windows server 2003
C.solaris 10
D.vista
E.windows xp pro
您可能感興趣的試卷
你可能感興趣的試題
Your customer has deployed a cisco wireless location appliance within its warehouse
environment. however， employees there have been experiencing problems when tracking objects using active rfid tags. you use an access point scan to determine if the location appliance has been deployed correctly.
Making which change to warehouse deployment location services will most likely correct the problem？（）
A.ensure channels are deployed such that they do not overlap
B.allow for the automatic containment of rogue access points
C.ensure each area is covered by a minimum of three access points
D.ensure a minimum rssi value of -50
A.4
B.32
C.8
D.16
A cisco 4404 wlan controller is being connected to a cisco 6500 catalyst series switch.
How would you interconnect and configure lag for connectivity and ensure redundancy？（）
A.all four ports from the cisco wlc terminated to the same catalyst gigabit module and channel group.
B.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 10 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 10.
C.all four ports from the cisco wlc terminated to the same catalyst gigabit module using two channel groups.
D.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 20 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 40.
A.50 feet [15 meters]
B.200 feet [60 meters]
C.150 feet [45 meters]
D.100 feet [30 meters]
A.gtc
B.md5
C.ms-chap v2
D.pap
A.develops a training plan and delivers via a custom workshop or e-learning
B.helps improve the performance and functionality of the infrastructure operations and network management system
C.reduces the risk of downtime caused by facilities-related problems
D.provides a step-by-step plan detailing the installation and service-commission requirement tasks to be staged in a controlled implementation environment that emulates a customer network
A.force infrastructure devices to associate only to this ssid
B.set infrastructure ssid
C.multiple bssid
D.set data beacon rate
E.enable ip redirection on this ssid
One of your customers has decided to deploy location-based services in addition to existing wireless services. the customer requires that the additional access points to be deployed in
monitor-only modE.
The most likely reason for this requirement is that the customer has which of these existing wireless devices？（）
A.data collection
B.802.11b/g voip
C.802.11b and g clients
D.rfid tags
A.igmp snooping
B.wmm
C.qos element for wireless phones
D.avvid priority mapping
A.systems integration
B.skill assessment
C.systems acceptance testing
D.wireless check
E.project close out
最新試題
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on.Which situation would result in thistype of problem？（）
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
When configuring Cisco Secure ACS to support wireless EAP authentication， which device must be configured as a AAA client？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）