Which dynamic routing protocol should be recommended for the Testking networkshown in the graphic above?()
A. OSPF
B. RIP version 1
C. RIP version 2
D. IGRP
E. EIGRP
您可能感興趣的試卷
你可能感興趣的試題
A. It uses a Reliable transport mechanism.
B. It uses a Non-reliable transport mechanism
C. It is less bandwidth-intensive than connection oriented services
D. it uses handshaking
A. ISDN
B. Wireless
C. Frame Relay
D. T1 leased line
E. ATM
F. VPN
A. 255.255.255.224
B. 255.255.255.248
C. 0.0.0.224
D. 0.0.0.8
E. 0.0.0.7
F. 0.0.0.3
A. The source and destination addresses
B. The destination port number
C. The destination address
D. The source address
E. All of the above
A. 192.168.16.32 0.0.0.16
B. 192.168.16.43 0.0.0.212
C. 192.168.16.0 0.0.0.15
D. 192.168.16.32 0.0.0.15
E. 192.168.16.0 0.0.0.31
F. 192.168.16.16 0.0.0.31
A. Router(config)# access-list 1 deny 172.31.212.74 any
B. Router(config)# access-list 1 deny 10.6.111.48 host
C. Router(config)# access-list 1 deny 172.16.4.13 0.0.0.0
D. Router(config)# access-list 1 deny 192.168.14.132 255.255.255.0
E. Router(config)# access-list 1 deny 192.168.166.127 255.255.255.255
A. You can delete individual statements in a named access list
B. Named access lists require a numbered range from 1000 to 1099.
C. Named access lists must be specified as standard or extended.
D. You can use the ip access-list command to create named access lists.
E. You cannot delete individual statements in a named access list.
F. You can use the ip name-group command to apply named access lists.
A. access-list 15 deny telnet any 10.10.1.0 0.0.0.255 eq 23
B. access-list 115 deny udp any 10.10.1.0 eq telnet
C. access-list 15 deny tcp 10.10.1.0 255.255.255.0 eq telnet
D. access-list 115 deny tcp any 10.10.1.0 0.0.0.255 eq 23
E. access-list 15 deny udp any 10.10.1.0 255.255.255.0 eq 23
A. access-list 101 permit tcp any 172.17.18.252 0.0.0.0 eq 80
B. access-list 1 permit tcp any 172.17.17.252 0.0.0.0 eq 23
C. access-list 101 permit tcp 172.17.17.252 0.0.0.0 any eq 23
D. access-list 101 deny tcp any 172.17.17.252 0.0.0.0 eq 23
E. access-list 101 deny tcp any 172.17.18.252 0.0.0.0 eq 80
F. access-list 101 permit tcp any 172.17.17.252 0.0.0.0 eq 23
A. ACLs monitor the number of bytes and packets.
B. Virus detection.
C. ACLs dentify interesting traffic for DDR.
D. ACLs provide IP route filtering.
E. ACLs provide high network availability.
F. ACLs classify and organize network traffic.
最新試題
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()
Five minutes after issuing the show running-config command, a technician enters the command again and notices that several access list statements have been altered. Because of this, the technician believes that the router is being configured by an unknown person through Telnet. Before changing the router passwords, the technician would like to discover if anyone is connected to the router by Telnet and stop them from making further changes.Which commands will accomplish these options?()
Which characteristics are representative of a link-state routing protocol?()
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?()
Which of the following host addresses are member of networks that can be routed across the public Internet? ()
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? ()
Which of the following options lists the steps in PPP session establishment in the correct order?()
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?()
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()