A. The source and destination addresses
B. The destination port number
C. The destination address
D. The source address
E. All of the above

A. 192.168.16.32 0.0.0.16
B. 192.168.16.43 0.0.0.212
C. 192.168.16.0 0.0.0.15
D. 192.168.16.32 0.0.0.15
E. 192.168.16.0 0.0.0.31
F. 192.168.16.16 0.0.0.31

A. Router(config)# access-list 1 deny 172.31.212.74 any
B. Router(config)# access-list 1 deny 10.6.111.48 host
C. Router(config)# access-list 1 deny 172.16.4.13 0.0.0.0
D. Router(config)# access-list 1 deny 192.168.14.132 255.255.255.0
E. Router(config)# access-list 1 deny 192.168.166.127 255.255.255.255

A. You can delete individual statements in a named access list
B. Named access lists require a numbered range from 1000 to 1099.
C. Named access lists must be specified as standard or extended.
D. You can use the ip access-list command to create named access lists.
E. You cannot delete individual statements in a named access list.
F. You can use the ip name-group command to apply named access lists.

A. access-list 15 deny telnet any 10.10.1.0 0.0.0.255 eq 23
B. access-list 115 deny udp any 10.10.1.0 eq telnet
C. access-list 15 deny tcp 10.10.1.0 255.255.255.0 eq telnet
D. access-list 115 deny tcp any 10.10.1.0 0.0.0.255 eq 23
E. access-list 15 deny udp any 10.10.1.0 255.255.255.0 eq 23

A. access-list 101 permit tcp any 172.17.18.252 0.0.0.0 eq 80
B. access-list 1 permit tcp any 172.17.17.252 0.0.0.0 eq 23
C. access-list 101 permit tcp 172.17.17.252 0.0.0.0 any eq 23
D. access-list 101 deny tcp any 172.17.17.252 0.0.0.0 eq 23
E. access-list 101 deny tcp any 172.17.18.252 0.0.0.0 eq 80
F. access-list 101 permit tcp any 172.17.17.252 0.0.0.0 eq 23

A. ACLs monitor the number of bytes and packets.
B. Virus detection.
C. ACLs dentify interesting traffic for DDR.
D. ACLs provide IP route filtering.
E. ACLs provide high network availability.
F. ACLs classify and organize network traffic.

A. Before they are routed to an outbound interface.
B. After they are routed for outbound traffic.
C. After they are routed to an outbound interface while queuing.
D. Before and after they are routed to an outbound interface.
E. Depends on the configuration of the interface
F. None of the above

A. To configure a route to the first Layer 3 device on the network segment.
B. To configure a route from an ISP router into a corporate network.
C. To configure a route when the administrative distance of the current routing protocolis too low.
D. To reach a network is more than 15 hops away.
E. To provide access to the Internet for enterprise hosts.

A. router(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1
B. router(config)# ip default-route 10.1.1.0
C. router(config)# ip default-gateway 10.1.1.0
D. router(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1