A.show secure
B.show file systems
C.show flash
D.show version

A.CSU/ DSU用于端接本地?cái)?shù)字環路
B.調制解調器端接本地?cái)?shù)字環路
C.一個CSU/ DSU終止模擬本地環路
D.調制解調器終止模擬本地環路
E.路由器通常被視為DTE設備
F.路由器通常被視為DCE設備

A.傳輸
B.網絡
C.表示
D.會話
E.應用

A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.

A.172.22.243.127
B.172.22.243.191
C.172.22.243.190
D.10.16.33.98
E.10.17.64.34
F.192.168.1.160

A.使用255.255.255.128子網掩碼時，在各接口不需要的IP地址。
B.使用255.255.255.128子網掩碼時，在各接口確實需要一個唯一的IP地址IP子網。
C.為255.255.255.0的子網掩碼時，必須是一個二層設備的電腦進行通信彼此。
D.為255.255.255.0的子網掩碼時，必須是一個三層設備的電腦進行通信彼此。
E.使用255.255.254.0的子網掩碼時，每個接口并不需要一個IP地址。

A.6to4 tunneling
B.VPN tunneling
C.GRE tunneling
D.ISATAP tunneling
E.PPP tunneling
F.Teredo tunneling

A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.

A.R1（config）# interface ethernet 0；R1（config-if）# ip address 192.1.1.129 255.255.255.192；R1（config-if）# no shutdown
B.R1（config）# interface ethernet 0；R1（config-if）# ip address 192.1.1.97 255.255.255.192；R1（config-if）# no shutdown
C.R1（config）# interface serial 0；R1（config-if）# ip address 192.1.1.4 255.255.255.252；R1（config-if）# clock rate 56000
D.R1（config）# interface serial 0；R1（config-if）# ip address 192.1.1.6 255.255.255.252；R1（config-if）# no shutdown
E.R1（config）# router rip；R1（config-router）# network 192.1.1.4；R1（config-router）# network 192.1.1.128
F.R1（config）# router rip；R1（config-router）# version 2；R1（config-router）# network 192.1.1.0

A.Router1的將剝離的源MAC地址，并將其與MAC地址0000.0c36.6965取代。
B.Router1的將剝離的源IP地址，并將其與IP地址192.168.40.1取代。
C.router1將剝離的目的MAC地址，并將其與MAC地址代替0000.0c07.4320。
D.router1將剝離的目的IP地址，并將其與192.168.40.1的IP地址替換。
E.Router1的將轉發數據包輸出接口的FastEthernet0/1。
F.router1將轉發數據包輸出接口的FastEthernet0/2。