A.Passive routes are in the process of being calculated by DUAL.
B.EIGRP supports VLSM，route summarization，and routing update authentication.
C.EIGRP exchanges full routing table information with neighboring routers with every update.
D.If the feasible successor has a higher advertised distance than the successor route，it becomes theprimary route.
E.A query process is used to discover a replacement for a failed route if a feasible successor is not identified from the current routing information.
您可能感興趣的試卷
你可能感興趣的試題
A.Switch3
B.Switch4
C.Switch2
D.Switch1
A.172.16.16.0
B.172.16.24.0
C.172.16.0.0
D.172.16.28.0
A.show frame-relay end-to-end
B.show frame-relay map
C.show frame-relay lmi
D.show frame-relay pvc
A.The data is moving from 10BASE-TX to 100BASE-TX.
B.The WAN encapsulation type has changed.
C.The data format has changed from analog to digital.
D.The source and destination hosts are in the same subnet.
E.The source and destination MAC addresses have changed.
A.Frame Relay
B.HDLC
C.x.25
D.PPP
A.120
B.100
C.90
D.110
A. the OSPF route
B. the EIGRP route
C. the RIPv2 route
D. all three routes
E. the OSPF and RIPv2 routes
A.enbale password c1sco
B.secret enable c1sco
C.password enable c1sco
D.enable secret c1sco
A.FF02：：A
B.FF05：：101
C.FF02：：9
D.FF02：：6
A.An IPv6 address is 64 b long and is represented as hexadecimal characters.
B.An IPv6 address is 32 b long and is represented as decimal digits.
C.An IPv6 address is 128 b long and is represented as decimal digits.
D.An IPv6 address is 128 b long and is represented as hexadecimal characters.
最新試題
請參見圖示。在網絡中，PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序？（）
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是，從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題？（）
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程？（）
請參見圖示。公司路由器由于故障被更換。更換路由器之后，Education 辦公室內的主機C 和D 能夠相互ping 通，但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么？（）
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述？（）
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍？（）
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果？（）
何時必須使用clock rate 命令配置路由器串行接口？（）
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序？（）