A. the OSPF route
B. the EIGRP route
C. the RIPv2 route
D. all three routes
E. the OSPF and RIPv2 routes
您可能感興趣的試卷
你可能感興趣的試題
A.enbale password c1sco
B.secret enable c1sco
C.password enable c1sco
D.enable secret c1sco
A.FF02::A
B.FF05::101
C.FF02::9
D.FF02::6
A.An IPv6 address is 64 b long and is represented as hexadecimal characters.
B.An IPv6 address is 32 b long and is represented as decimal digits.
C.An IPv6 address is 128 b long and is represented as decimal digits.
D.An IPv6 address is 128 b long and is represented as hexadecimal characters.
When upgrading the IOS image, the network administrator receives the exhibited error messagE.What could be the cause of this error?()
A.The new IOS image is too large for the router flash memory.
B.The TFTP server is unreachable from the router.
C.The new IOS image is not correct for this router platform.
D.The IOS image on the TFTP server is corrupt.
E.There is not enough disk space on the TFTP server for the IOS image.
A.Automatic summarization at classful boundries can cause problems on discontinuous subnets
B.EIGRP and OSPF are classful routing protocols and summarize routes by default
C.RIPv1 and OSPF are classless routing protocols
D.Classful routing protocols send the subnet mask in routing updates
A.to uniquely identify devices at Layer 2
B.to allow communication with devices on a different network
C.to differentiate a Layer 2 frame from a Layer 3 packet
D.to establish a priority system to determine which device gets to transmit first
E.to allow communication between different devices on the same network
F.to allow detection of a remote device when its physical address is unknown
A. It converges quickly.
B. OSPF is a classful routing protocol.
C. It uses cost to determine the best route.
D. It uses the DUAL algorithm to determine the best route.
E. OSPF routers send the complete routing table to all directly attached routers.
F. OSPF routers discover neighbors before exchanging routing information.
A.Cisco IOS IPsec/SSL VPN client
B.Cisco VPN Clinet
C.ISDN terminal adapter
D.Cisco Adaptive Security Appliance
A.The OSPF area is not configured properly.
B.The priority on R1 should be set higher.
C.The cost on R1 should be set higher.
D.The hello and dead timers are not configured properly.
E.A backup designated router needs to be added to the network.
F.The OSPF process ID numbers must match.
A.data link
B.network
C.physical
D.transport
最新試題
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
OSI 哪一層可提供有序的數據重構服務?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
要將數據包發送到遠程網絡,應使用哪種設備?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()