多項選擇題It has become necessary to configure an existing serial interface to accept a second Frame Relay virtualcircuit.Which of the following processes are required to accomplish this task?()

A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable split horizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which two are advantages of static routing when compared to dynamic routing?()

A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization iscompued automatically by the router.
E.Routing traffic load is reduced when used in stub network links
F.An efficient algorithm is used to build routing tables,using automatic updates.
G.Routing tables adapt automatically to topology changes.

2.多項選擇題Which three statements about RSTP are true?()

A.RSTP significantly reduces topology reconverging time after a link failure.
B.RSTP expends the STP port roles by adding the alternate and backup roles.
C.RSTP port atates are blocking,discarding,learing,or forwarding.
D.RSTP also uses the STP proprsal-agreement sequence.
E.RSTP use the same timer-baseed process as STP on point-to-point links.
F.RSTP provides a faster transition to the forwarding state on point-to-point links than STP does.

3.多項選擇題Cisco終端安全解決方案的首要組件有()

A.IronPort
B.Cisco NAC
C.SAN
D.CSA

4.多項選擇題What are two benefits of using NAT?()

A.NAT protects network security because private networks are not advertised.
B.NAT accelerates the routing process because no modifications are made on the packets.
C.Dynamic NAT facilitates connections from the outside of the network.
D.NAT facilitates end-to-end communication when IPsec is enable.
E.NAT eliminates the need to re-address all host that require extemal access.
F.NAT conserves addresses through host MAC-level multiplexing.

5.單項選擇題

Refer to the exhibit.Why are two OSPF designated routers designated routers identified on Core-Router?()

A.Core-Router is connected more than one multi-access network
B.The router at 208.149.23.130 is a secondary DR in case the primary fails.
C.Two router IDs have the same OSPF priority and are therefore tied for DR election
D.The DR ecection is still underway and there are two contenders for the role

6.多項選擇題防護終端的操作系統隱患有()技術

A.最小特權觀念
B.進程之間的隔離
C.標準檢測器
D.小的、可驗證的代碼塊

7.多項選擇題Cisco部署終端安全的策略基于() 成分

A.Cisco網絡準入控制
B.終端保護
C.網絡感染遏制
D.CSA

8.單項選擇題A network administrator receives an error message while tring to configure the Ethernet interface of arouter with IP address 10.24.24.24/29.which statement explains the reason for this issue?()

A.The address is a broadcast address
B.The Ehernet interface is faulty
C.VLSM-capable routing protocols must be enable first on the router.
D.This address is a network address.

9.多項選擇題下列哪些屬于第二層安全配置()

A.啟用端口安全
B.跟橋保護
C.廣播風暴控制
D.Cisco安全端口分析器

10.單項選擇題Which IPV6 routing protocol uses multicast group FF02::9 to send updates?()

A.RIPng
B.OSPFv3
C.static
D.IS-IS for IPv6

最新試題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()

題型:多項選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

OSI 哪一層可提供有序的數據重構服務?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:?jiǎn)雾?xiàng)選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:?jiǎn)雾?xiàng)選擇題