A.IP
B.ICMP
C.TCP
D.UDP
您可能感興趣的試卷
你可能感興趣的試題
A.one
B.three
C.two
D.zero
A.VLAN support
B.compression
C.authentication
D.sliding windows
E.multilink support
F.quality of service
網絡管理員在交換機1上創建一個新VLAN并且將主機C和主機D加入到此VLAN中。管理員配置交換機接口FastEthernet0/13到FastEthernet0/24成為新VLAN成員.但是網絡管理員完成配置以后,主機A可以和主機B通信,但是主機A不能和主機C或者主機D通信。哪個命令可以用來解決這個問題?()
A.
B.
C.
D.
A.Only passwords configured after the command has been entered will beencrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will beencrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.
A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization is compued automatically by the router.
E.Routing traffic load is reduced when used in stub network links.
F.An efficient algorithm is used to build routing tables,using automatic updates.
G.Routing tables adapt automatically to topology changes.
A.ping
B.Telnet
C.FTP
D.TCP
E.IP
A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
A.拒絕服務
B.強制疊加
C.監聽
D.木馬
A.The address is abroadcast address.
B.The Ehernet interface is faulty.
C.VLSM-capable routing protocols must be enable first on the router.
D.This address is a network address.
A.to confine network instability to single areas of the network
B.to reduce the complexity of router configuration
C.to speed up convergence
D.to lower costs by replacing router swith distribution layer switches
E.to decrease latency by increasing bandwidth
F.to reduce routing overhead
最新試題
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()