A.one
B.three
C.two
D.zero
您可能感興趣的試卷
你可能感興趣的試題
A.VLAN support
B.compression
C.authentication
D.sliding windows
E.multilink support
F.quality of service
網絡管理員在交換機1上創建一個新VLAN并且將主機C和主機D加入到此VLAN中。管理員配置交換機接口FastEthernet0/13到FastEthernet0/24成為新VLAN成員.但是網絡管理員完成配置以后,主機A可以和主機B通信,但是主機A不能和主機C或者主機D通信。哪個命令可以用來解決這個問題?()
A.
B.
C.
D.
A.Only passwords configured after the command has been entered will beencrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will beencrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.
A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization is compued automatically by the router.
E.Routing traffic load is reduced when used in stub network links.
F.An efficient algorithm is used to build routing tables,using automatic updates.
G.Routing tables adapt automatically to topology changes.
A.ping
B.Telnet
C.FTP
D.TCP
E.IP
A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
A.拒絕服務
B.強制疊加
C.監聽
D.木馬
A.The address is abroadcast address.
B.The Ehernet interface is faulty.
C.VLSM-capable routing protocols must be enable first on the router.
D.This address is a network address.
A.to confine network instability to single areas of the network
B.to reduce the complexity of router configuration
C.to speed up convergence
D.to lower costs by replacing router swith distribution layer switches
E.to decrease latency by increasing bandwidth
F.to reduce routing overhead
根據下圖,WLANdiagram決定了哪兩個事實?()
A.兩個cells的overlap的區域描述了一個basic service set
B.網絡描述了一個extended service set
C.再每個CELL中的AP必須被配置成使用channel 1
D.為了確保連通性,重疊區域必須小于10%
E.兩個訪問點應該被配置成工作在不同的頻道
最新試題
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()