A.This command should be executed from the global configuration mode
B.The IP address 10.121.16.8 is the local router port used to forward data
C.102 is the remote DLCI that will receive the information
D.This command is required for all Frame Relay configurations
E.The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
您可能感興趣的試卷
你可能感興趣的試題
A.PPP
B.WAP
C.HDLC
D.MPLS
E.L2TPv3
F.ATM
A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface
B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
C.Configure many sub-interfaces on the same subnet
D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces
A.show reload
B.show boot
C.show running-config
D.show version
A.LAN
B.routing
C.WAN
D.network
A.RIPng
B.OSPFv3
C.IS-IS for IPv6
D.static
A.presentation
B.session
C.transport
D.network
E.physical
A.transport
B.network
C.presentation
D.session
E.application
A.minimum cell rate (MCR)
B.quality of service (QoS)
C.modulation
D.packet switching exchange (PSE)
E.reliable transport protocol (RTP)
A.standby logic-channel logic-channel-number [priority]
B.standby nterface interface-type interface-number
C.logic-channel logic-channel-number
D.dialer map protocol next-hop-address dialer-string[logic-channel logic-channel-number]
A.It specifies use of a static encryption key that must be changed frequently to enhance security
B.It requires use of an open authentication method
C.It specifies the use of dynamic encryption keys that change each time a client establishes a connection
D.It requires that all access points and wireless devices use the same encryption key
E.It includes authentication by PSK
最新試題
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()