A.PPP
B.WAP
C.HDLC
D.MPLS
E.L2TPv3
F.ATM
您可能感興趣的試卷
你可能感興趣的試題
A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface
B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
C.Configure many sub-interfaces on the same subnet
D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces
A.show reload
B.show boot
C.show running-config
D.show version
A.LAN
B.routing
C.WAN
D.network
A.RIPng
B.OSPFv3
C.IS-IS for IPv6
D.static
A.presentation
B.session
C.transport
D.network
E.physical
A.transport
B.network
C.presentation
D.session
E.application
A.minimum cell rate (MCR)
B.quality of service (QoS)
C.modulation
D.packet switching exchange (PSE)
E.reliable transport protocol (RTP)
A.standby logic-channel logic-channel-number [priority]
B.standby nterface interface-type interface-number
C.logic-channel logic-channel-number
D.dialer map protocol next-hop-address dialer-string[logic-channel logic-channel-number]
A.It specifies use of a static encryption key that must be changed frequently to enhance security
B.It requires use of an open authentication method
C.It specifies the use of dynamic encryption keys that change each time a client establishes a connection
D.It requires that all access points and wireless devices use the same encryption key
E.It includes authentication by PSK
A.bandwidth
B.delay
C.load
D.reliability
最新試題
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
OSI 哪一層可提供有序的數據重構服務?()
要將數據包發送到遠程網絡,應使用哪種設備?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€廣播域?()