A. line timing
B. loop timing
C. internal timing
D. through timing
E. external timing
您可能感興趣的試卷
你可能感興趣的試題
A. DS-1; E1
B. DS-1; STM-1
C. OC-3; STM-1
D. STS-1; STM-1
E. OC-192; STM-192
A. SNCP traffic is switched from the first node that recieves the AIS. MS-SPRing traffic is rerouted from the first in the ring.
B. SNCP traffic is selected at the destination node in the ring. MS-SPRing is rerouted from the originating node in the ring.
C. SNCP traffic is rerouted from the originating node in the ring. MS-SPRing traffic is rerouted from the originating node in the ring.
D. SNCP traffic is selected at the destination node in the ring. MS-SPRing traffic is rerouted from the last reachable node in the ring.
A. All "Add" channels require uniform power levels.
B. The flexibility of wavelengths per OADM is limited.
C. It is easier to balance "Pass-Through" and "Add" channels.
D. There is lower pass-through loss using multi-channel OADMs.
E. You can extract a single channel without dropping other channels.
A 2.5 Gb/s (OC-48 or STM-16) optical signal with a dispersion tolerance of 1200 ps/nm goes through fiber with 18ps/nm*km of dispersion.
How many 15216-DCU-350 equivalents are needed for enough compensation after traveling 100 km?()
A. none
B. one
C. two
D. three
E. four
A. In an MS-SPRing, all paths are protected.
B. MS-SPRing is always a high-order protection.
C. A low order circuit cannot be protected by an MS-SPRing.
D. There is no theoretical limit in the number of nodes in an SNCP ring.
A. AMI
B. DUS
C. ESF
D. PRS
E. SMC
F. B8ZS
Given the formula: (Fiber Attenuation * Km) + (Splice Attenuation * # of Splices) + (Connector Attenuation * # of Connectors) + (Optical Fiber or OADM) + Buffer(Fiber aging)) With regard to SONET/SDH optical calculations,
what will the given formula provide?()
A. fiber loss
B. OSNR level
C. post amplification
D. index of reflection
E. index of refraction
F. power post amplification budget
Click the Exhibit button. Within an ONS 15454, you are provisioning a circuit on an unprotected SNCP ring. In the exhibit,
which two must you configure?()
A. revertive
B. circuit size
C. circuit type
D. bidirectional
E. protected drops
F. Switch on PDI-P
A. DUS
B. line timing
C. loop timing
D. internal timing
E. through timing
A. fiber dispersion
B. signal attenuation
C. transmitter power
D. amplifier bandwidth
E. receiver dispersion tolerance
最新試題
What protection method is used in 4F MS-SPRing networks?()
What are two important considerations when using 2- or 4-channel 15216 OADMs?()
In the OSNR model for EDFA amplifiers, SNR OUT = 1/(1/SNR IN + FhvB/P IN ), what does SNR IN represent?()
What are two major differences between MS-SPRing and SNCP?()
If node 2 is accepting line timing from node 1, node 2 will send () to node 1 as its SSM messge.
Which is a legitimate bandwidth matched pair?()
What three in combination are factors that can cause four-wave mixing in fiber-optic cables?()
The ONS 15216 is a 32-channel system. The ONS 15216 OADMs are capable of adding and dropping one, two, or four channels. How are the OADMs provisioned to add and drop specific channels?()
Which two can be transported in one AU-4? ()
Click the Exhibit button. Within an ONS 15454, you are provisioning a circuit on an unprotected SNCP ring. In the exhibit, which two must you configure?()