單項選擇題What is the final step of the core baselining process? ()

A. Implement threshold monitoring using RMON.
B. Implement monitoring using SNMP or RMON.
C. Poll and record specific SNMP MIB objects from the device.
D. Verify that SNMP MIB is supported in the relevant core device.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題When HSRP is configured on a network, which two of these items are provided, which are sharedbetween the routers that run HSRP? ()(Choose two.)

A. TCP-based hello packets
B. the impact of flapping links if timers are too low
C. a shared single interface
D. the ability to track serial interfaces
E. UDP-based hello packets

2.多項選擇題What are two characteristics of the relationship between the Cisco PIN architecture and CiscoValidated Designs? ()(Choose two.)

A. Cisco is focusing on Cisco Validated Designs as a means to driving integrated networks.
B. Cisco is focusing on the PIN architecture as a means to driving integrated networks.
C. The Cisco PIN architecture is a critical mechanism for supporting integrated markets because it can be implemented quickly.
D. The Cisco Validated Designs program provides critical mechanisms for supporting integrated markets because the mechanisms can be implemented quickly.
E. Cisco Validated Designs can be implemented quickly without customer input.

3.多項選擇題Which three of the following steps are mandatory when configuring MPLS on Cisco IOS?()(Choose three.)

A. start LDP
B. enable CEF switching
C. configure the MPLS ID
D. disable IP TTL propagation
E. configure conditional label advertising
F. enable label switching on frame mode interfaces

4.單項選擇題Which command retrieves and displays information about each Cisco product in the form of aUDI?()

A. show status
B. show hardware
C. show inventory
D. show environment

5.單項選擇題Why is there no need to configure complex overlay network topologies when using Cisco WAAS? ()

A. remote scheduling of software distribution
B. comprehensive logs, reports, and graphs
C. automatic discovery of Cisco WAEs
D. content pre-positioning

6.單項選擇題Which protocols does Cisco NSF support? ()

A. IS-IS, EIGRP, SSO, BGP
B. ISSU, OSPF, IS-IS
C. IETF, OSPF, ISSU
D. EIGRP, BGP, OSPF, IS-IS

7.單項選擇題When you issue the logging trap informational command, what happens? ()

A. An information trap is sent to the SNMP server.
B. Informational and debug messages are logged to the syslog server.
C. All messages are sent to the logging host, where selections are made.
D. All messages from emergencies to informational are sent to the logging host.

8.單項選擇題What will happen if you issue the redundancy force-switchover command on a Catalyst 6500Series Switch with redundant supervisor modules?()

A. reset of the primary supervisor
B. manual switchover from standby to active supervisor
C. manual switchover from active to standby supervisor
D. automatic switchover from active to standby on primary supervisor failure

9.單項選擇題In which phase is a systems acceptance test plan developed and documented?()

A.Implement
B.Design
C.Prepare
D.Operate

10.單項選擇題

Refer to the exhibit. For interface FastEthernet0/0, what will happen to dscp af11 traffic if thequeue for class "newclass" reaches a depth of 32? ()

A. All packets will be dropped.
B. One out of ten packets will be dropped.
C. A random number of packets will be dropped.
D. No packets will be dropped until the queue depth reaches 40.
E. Packets will be dropped according to the exponential weight setting.

最新試題

Referring to the partial Cisco Catalyst switch configuration shown, which two of these statements are correct? ()(Choose two.)

題型:多項選擇題

As an experienced technician, you are responsible for Technical Support in your company. One of the trainees is asking you which Cisco VPN Acceleration Module for Cisco 7200 Series routers and the Cisco 7301 provides high-performance encryption/compression and supports the latest encryption standard.Which of the following will answer his question?()

題型:單項選擇題

With a VPN Accelerator Module 2+ (VAM2+) installed in a Cisco 7200 series router, what will be the resulting action when entering the command no crypto engine accelerator slot number?()

題型:單項選擇題

What is the purpose of using VPN hardware acceleration equipment?()

題型:單項選擇題

Refer to the exhibit. For the given configuration, on packets leaving the router on interface FastEthernet0/0 that matches the high traffic class, what will the MPLS experimental bit be set to?()

題型:單項選擇題

You have just reinstalled a VIP 6-80 in a Cisco 7500 Series router. What must you do to bring up the port adapter interfaces?()

題型:單項選擇題

Which of the following allows network administrators to easily apply common services and employ features across Cisco switches, routers, and access points with an intuitive GUI?()

題型:單項選擇題

Which command is used to view IPv6 parameters related to the BGP process?()

題型:單項選擇題

Refer to the exhibit. Analyze the two traceroutes that are displayed. Which of these statements is correct in describing what most likely caused the traceroute differences?()

題型:單項選擇題

Which configuration will enable OSPF for IPv6 on FastEthernet 0/0/0?()

題型:單項選擇題