A. it will search for the configuration file in the locations specified by boot system commands.
B. it will search for the configuration file in flash and if no configuration file is found there, it will enter the setup dialog.
C. it will search for the configuration file on a TFTP server and if no configuration file is found there, it will enter the setup dialog.
D. it will search for the configuration file in flash and if no configuration file is found there, it will load a limited configuration file from ROM.
E. it will search for the configuration file on a TFTP server and if no configuration file is found there, it will load a limited configuration file from ROM.

A. The router will use the static route.
B. The router will use the OSPF route.
C. The route will use the EIGRP route.
D. The router will load balance and use all three routes.

A. store and forward
B. fragment-free
C. adaptive cut-through
D. fast-forward

A. it avoids split-horizon issues with distance vector routing protocols.
B. IP addresses can be conserved if VLSM is not being used for subnetting.
C. A multipoint interface offers greater security compared to point-to-point subinterface configurations.
D. The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.

A.transparent
B.auto
C.on
D.desirable
E.client
F.forwarding

A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.loadbalancing

A. The ip classless command is enabled by default in recent versions of IOS.
B. The ip classless command should only be enabled when static routing is being used instead of a routing protocol.
C. The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.
D. The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.

A.1
B.10
C.1562
D.64000
E.128000

A.10.172.13.65
B.172.16.223.125
C.172.64.12.29
D.192.168.23.252
E.198.234.12.95
F.212.193.48.254

A. An IP address is required on the physical interface of the central router.
B. All routers are required to be fully meshed.
C. All routers must be in the same subnet to forward routing updates and broadcasts.
D. Multipoint is the default configuration for Frame Relay subinterfaces.