Which switch is the root bridge for VLAN 1?()
A.Sw-DS1
B.Sw-AC1
C.Sw-AC2
D.Sw-AC3
您可能感興趣的試卷
你可能感興趣的試題
Out of which port on Sw-Ac3 would a frame containing an IP packet with a destination address that is not on a local LAN be forwarded?()
A.Fa0/1
B.Fa0/3
C.Fa0/4
D.Fa0/8
E.Fa0/9
F.Fa0/12
What interface did Sw-AC3 associate with source MAC address 0010.5a0c.ffba?()
A.Fa0/1
B.Fa0/3
C.Fa0/6
D.Fa0/8
E.Fa0/9
F.Fa0/12
What address should be configured as the default-gateway for the host connected to interface Fa0/4 of Sw-AC3?()
A.192.168.1.254
B.192.168.22.254
C.192.168.33.254
D.192.168.44.254
A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's ethernet port using a straight-through cable.
D. Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
E. Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.
A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
A. It configures a router to send all packets out interface serial 0/0.
B. It configures a router to block routing updates from being sent out interface serial 0/0.
C. It configures a router as a firewall, blocking all unauthorized packets from exiting serial 0/0.
D. It configures a router to send all packets for unknown destination networks out interface serial 0/0.
E. It configures a router to drop all packets for which the destination network is unknown.
A. It is used to validate the sources of VTP advertisements sent between switches.
B. It is used to access the VTP server to make changes to the VTP configuration.
C. It allows two VTP servers to exist in the same domain, each configured with different passwords.
D. It is the password required when promoting a switch from VTP client mode to VTP server mode.
E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
A company is experiencing network delays. The network administrator discovers that a worker in a location far from the MDF has connected an old 10BASE-T switch with redundant links to the existing network.
How could this action be responsible for the impaired network performance?()
A. Connecting a host to the old switch has created a broadcast storm.
B. The 10BASE-T switch forced the entire network to be reduced to 10 Mbps operation.
C. The old switch does not support VLANs, which has disabled the VLAN configuration of the entire the network.
D. The old switch does not support full-duplex operation, effectively forcing half-duplex operation throughout the network.
E. Spanning Tree Protocol has elected the old switch as the root bridge, creating inefficient data paths through the switched network.
A.DHCP
B.SMTP
C.SNMP
D.FTP
E.HTTP
F.TFTP
A. Denmark exchanges with Utah, Paris, and Berlin.
B. Utah exchanges only with Denmark.
C. Berlin exchanges with Denmark, Utah, and Paris.
D. Paris exchanges only with Denmark.
E. Denmark exchanges with only Paris and Utah.
最新試題
What does a configuration Register Setting of 0x2105 indicate to the Router? ()
Which command is used to display the placement and direction of an IP access control list on a router?()
Which of the following if addresses can be assigned to host devices?()
What feature of a networks switch allows an administrative to create separate broadcast domains?()
Which of the following host addresses are member of networks that can be routed across the public Internet? ()
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?()
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?()
Which of the following correctly describe steps in the OSI data encapsulation process?()