A. point-to-point
B. broadcast multi-access
C. nonbroadcast multi-access
D. nonbroadcast multipoint
E. broadcast point-to-multipoint
您可能感興趣的試卷
你可能感興趣的試題
A. RIP v1
B. RIP v2
C. IGRP
D. OSPF
E. EIGRP
A. ping 127.0.0.0
B. ping 203.125.12.1
C. telnet 127.0.0.1
D. ping 127.0.0.1
E. tracert 203.125.12.1
A. in order to optimize the path that frames take from source to destination
B. to increase the priority so a designated port will become a root port
C. to increase the BID, so the switch is more likely to become root bridge
D. in order to allow VLANs to be sent from one switch to another across a single link
E. to force a given switch to become an STP server
A. designated ports.
B. duplex operating mode.
C. fast mode ports.
D. root bridge.
E. root ports.
F. BDPU priority.
A. 172.16.42.0
B. 172.16.107.0
C. 172.16.208.0
D. 172.16.252.0
E. 172.16.254.0
A. It supports VLSM.
B. It is used to route between autonomous systems.
C. It confines network instability to one area of the network.
D. It increases routing overhead on the network.
E. It allows extensive control of routing updates.
F. It is simpler to configure than RIP v2.
A.127.0.0.1
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.224.0.0.5
F.254.255.255.255
A.205.7.8.32/27
B.191.168.10.2/23
C.127.0.0.1
D.224.0.0.10
E.203.123.45.47/28
F.10.10.0.0/13
A. VTP
B. ISL
C. CDP
D. 802.1Q
E. 802.1p
F. LLC
A. All switch and bridge ports are in the forwarding state.
B. All switch and bridge ports are assigned as either root or designated ports.
C. All switch and bridge ports are in either the forwarding or blocking state.
D. All switch and bridge ports are either blocking or looping.
最新試題
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? ()
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? ()
What is a global command?()
Which connections allow the use of full-duplex Ethernet?()
What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?()
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()
Which of the following statements regarding routed and routing protocols are true?()
What does a configuration Register Setting of 0x2105 indicate to the Router? ()
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()