多項選擇題Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?()

A. Needs to use Inverse ARP.
B. Maps a single IP subnet per DLCI.
C. Maps a single IP subnet across multiple DLCIs.
D. Resolves NBMA (non broadcast multi access) split horizon issues.
E. Requires use of the frame-relay map command.
F. None of the above


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題In regard to a hub and spoke Frame-Relay data network, what kind of physical network is it classified as?()

A. point-to-point
B. broadcast multi-access
C. nonbroadcast multipoint
D. nonbroadcast multi-access
E. broadcast point-to-multipoint

2.多項選擇題Which of the following statements regarding ISDN are correct?()

A. Each ISDN B channel has transmission speeds of up to 64 kbps.
B. The ISDN B channel can carry video, voice or data.
C. The ISDN B channel transmission rate varies depending on the service used.
D. The ISDN D channel transmits control information.
E. The ISDN B channels can be configured with different subnets and encapsulation types when dialer profiles are configured.

3.多項選擇題Which of the following are correct regarding ISDN?()

A. Legacy DDR can use port information to define interesting traffic.
B. Legacy DDR can configure multiple dialer configurations on the same interface.
C. Legacy DDR can use ACLs to define interesting traffic.
D. HDLC or PPP can be used to encapsulate ISDN D channel information.
E. The BRI interfaces on ISDN routers with dialer profiles configured cannot belong to multiple dialer pools.
F. Dialer profiles cannot use extended ACLs to define interesting traffic.

4.單項選擇題You have a single ISDN BRI B channel. What is its maximum bandwidth capacity of this one channel?()

A. 16kb/s
B. 64kb/s
C. 128kb/s
D. 144kb/s
E. 192kb/s
F. 256kb/s

7.單項選擇題You are preparing to create a point to point WAN by connecting a Cisco router with a Juniper router by way of their serial links. Which one of the following commands would you use?()

A. TK1(config-if)# encapsulation hdlc ansi
B. TK1(config-if)# encapsulation ppp
C. TK1(config-if)# encapsulation LAPD
D. TK1(config-if)# encapsulation frame-relay ietf
E. TK1(config)#encapsulation ppp

8.單項選擇題Which one of the WAN data-link protocols below is used for out-of-band signaling?()

A. HDLC
B. NCP
C. PAP
D. LAPD
E. LAPB
F. None of the above

9.多項選擇題Which of the following correctly describe characteristics of PPP?()

A. Encapsulates several different types of routing protocols.
B. Supports only IP.
C. Can be used over analog circuits.
D. Is proprietary to Cisco
E. Supports error correction.

10.多項選擇題What are some common layer 2 encapsulations for a WAN link?()

A. Ethernet
B. PPP
C. Token Ring
D. HDLC
E. Frame Relay
F. POTS

最新試題

Which of the following host addresses are member of networks that can be routed across the public Internet? ()

題型:多項選擇題

What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? ()

題型:單項選擇題

What does a configuration Register Setting of 0x2105 indicate to the Router? ()

題型:單項選擇題

How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()

題型:單項選擇題

What feature of a networks switch allows an administrative to create separate broadcast domains?()

題型:單項選擇題

A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?()

題型:多項選擇題

What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?()

題型:單項選擇題

What is the subnetwork address for a host with IP address 201.100.5.68/28?()

題型:單項選擇題

A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?()

題型:單項選擇題

A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? ()

題型:多項選擇題