A.19dBm
B.67dBm
C.10dBm
D.86dBm
E.5dbm to 10dBm
您可能感興趣的試卷
你可能感興趣的試題
A.5;10%
B.10;15%
C.15;20%
D.20;25%
A.3
B.4
C.11
D.13
E.14
A. signal strength 46dBm, noise level 95dBm
B. signal strength 74dBm, noise level 94dBm
C. signal strength 68dBm, noise level 79dBm
D. signal strength 50dBm, noise level 56dBm
A.0.1%
B.1%
C.2.5%
D.25%
A. cell phones
B. remote access
C. mobility services
D. network management
E. network unification
F. network decentralization
A.50
B.100
C.150
D.200
E.250
A. It should be implemented in a management VLAN.
B. Its connection to managed devices should be over a data VLAN.
C. It is made up of Cisco Security MARS and Clean Access software.
D. It should be deployed as close to the edge of the network as possible.
E. It delivers policy administration and enforcement for the Cisco Self-Defending Network.
A. secure tunnels
B. a separate management VLAN
C. secure VLANs to isolate sensors
D. an out-of-band path around the firewall
E. asymmetric traffic flows to isolate sensors
F. private VLANs to put all sensors on isolated ports
A. bridging VLANs on two switches
B. bridging two VLANs on one switch
C. between two Layer 2 devices withtrunking
D. between two Layer 2 devices withouttrunking
E. between a Layer 2 device and a Layer 3 device withtrunking
A. only operational in routed mode
B. only operational in transparent mode
C. only eight interfaces can belong to an asymmetric routing group
D. operational in both failover and non-failover configurations
E. only operational when the firewall has been configured for failover
最新試題
During consultation, you find that a customer has only a single asset closet and is looking for a solution that is easy to deploy. Which NAS physical deployment model would you suggest to this customer?()
Please match the Cisco STP enahancement term to its definition.()(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
Which of the following is the primary consideration to scale VPNs?()
Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet?()
Which two of these are advantages of placing the VPN device parallel to the firewall?()
You are the network consultant from pass4sure.com. One of your customer has six sites, three of which process a large amount of traffic among them. He plans to grow the number of sites in the future. Which is the most appropriate design topology?()
One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?()
Cisco Express Forwarding (CEF) is mainly used to increase packet switching speed, reducing the overhead and delays introduced by other routing techniques, increasing overall performance.Which of the following concerning CEF is recommended by Cisco?()
Which three of these are important when determining NAS Server scaling? ()
In which tunnel-less VPN topology do group members register with a key server in order to receive the security association necessary to communicate with the group?()