A. The design supports multiple server subnets.
B. An end-user sees the IP address of the real server.
C. SLB routes between the outside and inside subnets.
D. The source or destination MAC address is rewritten, but the IP addresses left alone.
E. SLB acts as a "bump in the wire" between servers and upstream firewall or Layer 3 devices.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. Which two of these are characteristics of a firewall running in transparent mode?()
A. FWSM routes traffic between the VLANs.
B. FWSM switches traffic between the VLANs.
C. Transparent mode is often called bump-in-the-wire mode.
D. Transparent mode firewall deployments are used most often in current designs.
E. Traffic routed between VLANs is subject to state tracking and other firewall configurable options.
A. Zoning increases security.
B. DNS queries are used for software zoning.
C. Software zoning is more secure than hardware zoning.
D. When using zones and VSANs together, the zone is created first.
E. Zoning requires that VSANs be established before it becomes operational.
A. They are known as fabric routing.
B. They cannot span multiple switches.
C. Their connectivity is supported by Layer 2.
D. They enable devices in different VSAN fabrics to communicate.
E. They require that multiple switch fabrics be merged before they can function.
A. The FCIP stack supports file-level storage for remote devices.
B. Both require high throughput with low latency and low jitter.
C. The purpose of FCIP is to provide connectivity between host and storage.
D. TheiSCSI stack supports block-level storage for remote devices.
E. The purpose ofiSCSI is to provide connectivity between separate wide-area SANs.
A. a higher fan-out ratio
B. fully redundant switches
C. 100 percent port efficiency
D.allI S Lscontained with inasingle chass is
E.higher latency and through put than acore-edged esign switch
A.IVR
B.VoQ
C.FSPF
D.VSANs
E.SANTap
A.ISL
B.IVR
C.VoQ
D.VSANs
E.EnhancedISL
A. It operates much like TCP.
B. Flow control is only provided by QoS.
C. It must be implemented in an arbitrated loop.
D. Communication methods are similar to those of an Ethernet bus.
E. N_Port to N_Port connections use logical node connection points.
A. supports multiple protocols
B. works only in a shared or loop environment
C. allows addressing for up to 4 million nodes
D. allows addressing for up to 8 million nodes
E. provides a high speed transport for SCSI payloads
F. may stretch to a distance of up to100 km before needing extenders
A. Data is accessed using NFS or CIFS.
B. Data is accessed at the block level.
C. NAS is referred to as captive storage.
D. Storage devices can be shared between users.
E. A NAS implementation is not as fast as a DAS implementation.
最新試題
As an experienced technician, you are responsible for Technical Support. Which of the following descriptions is correct about the characteristic of SLB one arm mode?()
Which two of these are advantages of placing the VPN device parallel to the firewall?()
One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?()
Which two of these are advantages of placing the VPN device in the DMZ on the firewall?()
Please match the Cisco STP enahancement term to its definition.()(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
Which technology allows centralized storage services to be shared across different VSANs?()
What is the recommended practice when considering VPN termination and firewall placement?()
In which tunnel-less VPN topology do group members register with a key server in order to receive the security association necessary to communicate with the group?()
What is the recommended radius of a cell for a voice-ready wireless network?()
As an experienced technician, you are responsible for infrastructure design and global configuration changes. You are asked to deploy a Voice over Wireless LAN for your company. If the cells have the same channel, the separation between them should be:()