A. a router with subinterfaces configured on the physical interface that is connected to the switch
B. a router with an IP address on the physical interface connected to the switch
C. a switch with an access link that is configured between the switches
D. a switch with a trunk link that is configured between the switches
您可能感興趣的試卷
你可能感興趣的試題
A. More collision domains will be created.
B. IP address utilization will be more efficient.
C. More bandwidth will be required than was needed previously.
D. An additional broadcast domain will be created.
A. 32768: 11-22-33-44-55-66
B. 32768: 22-33-44-55-66-77
C. 32769: 11-22-33-44-55-65
D. 32769: 22-33-44-55-66-78
A. client
B. dynamic
C. server
D. static
E. transparent
A. application
B. internet
C. network
D. transport
A. 510
B. 1022
C. 1024
D. 2048
A. 192.0.2.0
B. 192.0.2.255
C. 192.0.3.255
D. 192.0.4.0
A. 192.168.8.25
B. 192.168.8.41
C. 192.168.8.49
D. 192.168.8.113
A. 6, 9, 12, 18
B. 1, 2, 5.5, 6
C. 5.5, 6, 9, 11
D. 1, 2, 5.5, 11
A. learning
B. listening
C. discarding
D. forwarding
A. server
B. client
C. tunnel
D. transparent
最新試題
What is the subnetwork address for a host with the IP address 201.100.5.68/28?()
Which device might be installed at a branch office to enable and manage an IPsec site-to-site VPN?()
Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?()
Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?()
After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?()
What is the purpose of the cisco Vlan Trunking protocol?()
Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaion address?()
If all OSPF routers in a single area are configured with the same priority value,what value dose a router use for the ODPF router ID in the absence of a loopback interface?()
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?()
Which Cisco IOS diagnostics command can disrupt the operation of a router under high-load conditions?()