A.Each switch port is assigned to a specific VLAN.
B.Dynamic VLANs require a VLAN Membership Policy Server.
C.Devices are in the same VLAN regardless of which port they attach to.
D.Dynamic VLAN assignments are made through the command line interface.
您可能感興趣的試卷
你可能感興趣的試題
A.VLAN membership of a user always remains the same even when he/she is moved to another location.
B.VLAN membership of a user always changes when he/she is moved to another location.
C.Membership can be static or dynamic.
D.Membership can be static only.
E.None of the other alternatives apply.
A.Creating smaller broadcast domains by implementing VLANs.
B.Separate nodes into different hubs.
C.Creating larger broadcast domains by implementing VLANs.
D.Separate nodes into different switches.
E.All of the above.
A.20 percent of the traffic on a network segment should be local.
B.no more than 20 percent of the network traffic should be able to move across a backbone.
C.no more than 80 percent of the network traffic should be able to move across a backbone.
D.80 percent of the traffic on a network segment should be local.
A.End-to-end VLANs are easy to manage.
B.Users are grouped into VLANs independent of a physical location.
C.Each VLAN has a common set of security and resource requirements for all members.
D.Resources are restricted to a single location.
A.Eighty percent of traffic on the network is destined for Internet sites.
B.There are common sets of traffic filtering requirements for workgroups located in multiple buildings.
C.Eighty percent of a workgroup’s traffic is to the workgroup’s own local server.
D.Users are grouped into VLANs independent of physical location.
E.None of the other alternatives apply
A.802.11B
B.spanning-tree
C.802.1Q
D.ISL
E.VTP
F.Q.921
Refer to the exhibit. On the basis of the information provided in the exhibit, which two sets of procedures are best practices for Layer 2 and 3 failover alignment?（）
A. Configure the D-SW1 switch as the active HSRP router and the STP root for all VLANs. Configure the D-SW2 switch as the standby HSRP router and backup STP root for all VLANs.
B. Configure the D-SW1 switch as the standby HSRP router and the STP root for VLANs 11 and 110. Configure the D-SW2 switch as the standby HSRP router and the STP root for VLANs 12 and 120.
C. Configure the D-SW1 switch as the active HSRP router and the STP root for VLANs 11 and 110. Configure the D-SW2 switch as the active HSRP router and the STP root for VLANs 12 and 120.
D. Configure the D-SW2 switch as the active HSRP router and the STP root for all VLANs. Configure the D-SW1 switch as the standby HSRP router and backup STP root for all VLANs.
E. Configure the D-SW1 switch as the active HSRP router and the backup STP root for VLANs 11 and 110. Configure the D-SW2 switch as the active HSRP router and the backup STP root for VLANs 12 and 120.
F. Configure the D-SW1 switch as the standby HSRP router and the backup STP root for VLANs 12a nd 120. Configure the D-SW2 switch as the standby HSRP router and the backup STP root for VLANs 11 and 110.
A.Routing should occur at the access layer ifvoice VLANs are utilized. Otherwise， routing should occur at the distribution layer.
B.Routing should always be performed at the distribution layer.
C.VLANs should be localized to a switch.
D.VLANs should be localized to a single switch unlessvoice VLANs are being utilized.
E.Routing should not be performed between VLANs located on separate switches.
A.Topology-based switching
B.Demand-based switching
C.Route caching
D.Flow-based switching
E.None of the other alternatives apply
最新試題
What two things will occur when an edge port receives a BPDU？（）
Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port：00：06：34： %CDP-4-DUPLEX_MISMATCH： duplex mismatch discovered on FastEthernet0/5 （not half duplex）， with SW_A FastEthernet0/4 （half duplex） ， with TBA05071417（Cat6K-B） 0/4 （half duplex）. What would be the possible outcome of the problem？（）
Refer to the exhibit. Initially， LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link？（）
During routine maintenance， it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time， DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ？ （）
Refer to the exhibit. For what purpose is the command show ip cef used？（）
Refer to the exhibit. Which Virtual Router Redundancy Protocol （VRRP） statement is true about the roles of the master virtual router and the backup virtual router？（）
Refer to the exhibit. The command switchport mode access is issued on interface FastEthernet0/13 on switch CAT1. What will be the result？（）
Which statement is correct about the use of the virtual interface on a WLC ？（）
How are STP timers and state transitions affected when a topology change occurs in an STP environment？（）
Which two statements are true about BPDU port-guard and BPDU filtering？（）