多項選擇題If IP routing is enabled, which two commands set the gateway of last resort to the default gateway?（）

A. ip default-gateway 0.0.0.0
B. ip route 172.16.2.1 0.0.0.0 0.0.0.0
C. ip default-network 0.0.0.0
D. ip default-route 0.0.0.0 0.0.0.0 172.16.2.1
E. ip route 0.0.0.0 0.0.0.0 172.16.2.1


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? （）

A. Replace the straight-through cable with a crossover cable.
B. Change the subnet mask of the hosts to /25.
C. Change the subnet mask of the hosts to /26.
D. Change the address of Workstation A to 192.0.2.15.
E. Change the address of Workstation B to 192.0.2.111.

2.多項選擇題Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0？（）

A.113.10.4.0
B.186.54.3.0
C.175.33.3.255
D.26.35.2.255
E.17.35.36.0

3.單項選擇題The network default gateway applying to a host by DHCP is 192.168.5.33/28.Which option is the valid IP address of this host？（）

A.192.168.5.55
B.192.168.5.47
C.192.168.5.40
D.192.168.5.32
E.192.168.5.14

4.單項選擇題Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13.An 802.1Q trunk is configured between the two switches.On CAT1，VLAN10 is chosen as native，but on CAT2 the native VLAN is not specified.What will happen in this scenario？（）

A.802.1Q giants frames could saturate the link.
B.VLAN10 on CAT1 and VLAN1 on CAT2 will send untagged frames.
C.A native VLAN mismatch error message will appear.
D.VLAN10 on CAT1 and VLAN1 on CAT2 will send tagged frames.

5.單項選擇題Which command shows system hardware and software version information？（）

A.show configuration
B.show environment
C.show inventory
D.show platform
E.show version

8.單項選擇題What must be configured on the network in order for users on the Internet to view web pages  located on Web Server 2?（）

A.On router R2， configure a default static route to the 192.168.1.0 network.
B.On router R2， configure DNS to resolve the URL assigned to Web Server 2 to the  192.168.1.10 address.
C.On router R1， configure NAT to translate an address on the 209.165.100.0/24 network to  192.168.1.10.
D.On router R1， configure DHCP to assign a registered IP address on the 209.165.100.0/24  network to Web Server 2.

10.單項選擇題Users on the 192.168.1.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server?（）

A.ip route 0.0.0.0 0.0.0.0 s0/0/0
B.ip route 0.0.0.0 0.0.0.0 209.165.200.226
C.ip route 209.165.200.0 255.255.255.0 192.168.1.250
D.ip route 192.168.1.0 255.255.255.0 209.165.100.250