A.數據鏈路
B.網絡
C.物理
D.傳輸

A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1# show swithport port-secure interface FastEthernet 0/12
C.SW1# show port-secure interface FastEthernet 0/12
D.SW1#show running-config
E.SW1#show port-security interface FastEthernet 0/12

A.最低端口MAC地址
B.端口的優先級號和MAC地址
C.VTP修訂號
D.最高的端口優先級數量
E.路徑開銷（cost）

A.RSTP鏈路故障后顯著減少拓?fù)渚酆蠒r(shí)間
B.RSTP通過增加備用和備份角色的消費STP端口角色
C.RSTP端口atates被阻塞，丟棄，learing，或轉發
D.RSTP還使用STP proprsal-協議序列
E.RSTP使用相同的定時器baseed過程STP上點至點鏈接
F.在點到點鏈路提供比STP更快的傳輸和轉發

A.VTP
B.802.1Q
C.RSTP
D.STP

A.Port security needs to be globally enabled.
B.Port security needs to be enabled on the interface.
C.Port security needs to be configured to shut down the interface in the event of a violation.
D.Port security needs to be configured to allow only one learned MAC address.
E.Port security interface counters need to be cleared before using the show command.
F.The port security configuration needs to be saved to NVRAM before it can become active.

A.IR
B.DSSS
C.FHSS
D.DSSS and FHSS
E.IR, FHSS, and DSSS

A.802.1Q native VLAN frames are untagged by default.
B.802.1Q trunking ports can also be secure ports.
C.802.1Q trunks can use 10 Mb/s Ethernet interfaces.
D.802.1Q trunks require full-duplex， point-to-point connectivity.
E.802.1Q trunks should have native VLANs that are the same at both ends.

A.172.31.17.4/30
B.172.31.51.16/30
C.172.31.64.0/18
D.172.31.80.0/22
E.172.31.92.0/22
F.172.31.192.0/18

A.在二層唯一確定一臺設備
B.是設備在不同的網絡中通信
C.區別二層和三層幀
D.確定設備的優先級
E.是同一網絡的不同設備可以通信
F.當不知道遠程設備的物理地址時可以查詢