多項選擇題下列哪些算法是非對稱密鑰算法()

A.IKE
B.安全套階層
C.SSH
D.PGP


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題Which dose the frame-relay interface-dlci command configure?()

A.remote DLCI on the main interface
B.local DLCI on the main interface
C.local DLCI on the subinterface
D.remote DLCI on the subinterface

3.單項選擇題3DES使用的是()

A.加密—加密—解密
B.加密—解密—加密
C.解密—加密—解密
D.加密—加密—加密

4.單項選擇題Which command can be a router to verify the layer 3 path to a host?()

A.traceroute address
B.tracert address
C.ssh address
D.telnet address

6.多項選擇題選擇加密算法時應該考慮的標準為()

A.算法是受到密碼界社團信任的
B.算法能夠充分抵抗強力攻擊
C.算法支持可變的和長的密鑰長度以及擴展性
D.算法有沒有出口和進口限制

7.單項選擇題What is one benefit of PVST+?()

A.PVST+reduces the CPU cycles for all the switches in the network
B.PVST+automatically selects the root bridge location,to provide optimiz…
C.PVST+allow the root switch location to be optimized per vlan.
D.PVST+supports Layer 3 load balancing without loops.

8.多項選擇題Which two are advantages of static routing when compared to dynamic routing?()

A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization iscompued automatically by the router.
E.Routing traffic load is reduced when used in stub network links
F.An efficient algorithm is used to build routing tables,using automatic updates.
G. Routing tables adapt automatically to topology changes.

9.多項選擇題下列算法中哪些是對稱密鑰算法()

A.DES
B.3DES
C.AES
D.SEAL

10.單項選擇題Which item represents the standard IP ACL?()

A.access-list 50 deny 192.168.1.1 0.0.0.255
B.access-list 110 permit ip any any
C.access-list 2500 deny tcp any host 192.168.1.1 eq 22
D.access-list 101 deny tcp any host 192.168.1.1

最新試題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()

題型:多項選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:?jiǎn)雾?xiàng)選擇題