Refer to the exhibit.A new subnet with 60 hosts has been added to the network.Which subnet addressshould this network use to provide enough usable addresses while wasting the fewest addresses?()
A.192.168.1.56/27
B.192.168.1.64/26
C.192.168.1.64/27
D.192.168.1.56/26
您可能感興趣的試卷
你可能感興趣的試題
A.a primary route,stored in the routing table
B.a backup route,stored in the routing table
C.a backup route,stored in the topology table
D.a primary route,stored in the topology table
A.Addresses are allocated after a negotiation between the server and the host to determine the length of the agreement.
B.Addresses are assigned for a fixed period of time.At the end of period,a newquest for an address must be made ,and another address is then assigned.
C.Addresses are leased to host.A host will usually keep the same address by periodically contacting the DHCP sever to renew the lease.
D.Addresses are permanently assigned so that the host uses the same address at all times.
A.重置UDP
B.產生一個警報
C.丟去或阻止這個行為
D.允許該行為
A.基于樣本的檢測
B.基于異樣的檢測
C.基于策略的檢測
D.基于沙盤的檢測
A.lowest port MAC address
B.port priority number and MAC address.
C.VTP revision number
D.highest port priority number.
E.path cost
A.nly passwords configured after the command has been entered will be encrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will be encrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.
A.類型
B.服務
C.觸發
D.行動
A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
A.FE08::280e:611:a:f14f:3d69
B.FE81::280f:512b:e14f:3d69
C.FE80::380e:611a:e14f:3d69
D.FEFE:0345:5f1b::e14d:3d69
A.網絡數據流的數量
B.網絡拓?fù)?br />
C.安全預算
D.管理IPS的可用安全人員
最新試題
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
何時必須使用clock rate 命令配置路由器串行接口?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
OSI 模型的哪兩項功能在第2層實現?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
下列哪些是私有IP 地址的地址范圍?()