多項選擇題IDS和IPS技術使用()部署方式

A.基于防火墻的IPS部署
B.基于軟件的IPS部署
C.基于網絡的IPS部署
D.基于主機的IPS部署


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題What is the function of the command switchport trunk native vlan 999 on a switch?()

A.It designates VLAN 999 for untagged traffic.
B.It blocks VLAN 999 traffic from passing on the trunk.
C.It creates a VLAN 999 interface.
D.It designates VLAN 999 as the default for all unkown tagged traffic.

2.多項選擇題IDS和IPS傳感器可以是以下設備中的哪些()

A.配置了Cisco IOS IPS軟件的路由器
B.專門的Cisco網絡防火墻
C.專門設計用來提供專有IDS或IPS服務的設備
D.安裝在相應的安全設備、交換機或路由器上的網絡模塊

4.單項選擇題The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?()

A.network 172.26.168.0 area 478
B.network 172.26.0.0
C.network 172.26.168.128 0.0.0.127
D.network 172.26.168.128 area 478

5.多項選擇題基于上下文的訪問控制CBAC有那些局限性()

A.導致網絡性能下降
B.接口間的流量控制策略復雜
C.策略不能綁定到主機組或子網,通過一個接口的所有流量經過同樣的檢查
D.處理過于依賴ACL

6.多項選擇題基于上下文的訪問控制CBAC提供哪些功能()

A.流量過濾
B.流量檢測
C.入侵檢測
D.主動防御

7.單項選擇題Wich command can you use to manually assign a static IPV6 address to a router interface?()

A.ipv6 address PREFIX_1::1/64
B.ipv6 autoconfig 2001:db8:2222:7272::72/64
C.ipv6 autoconfig
D.ipv6 address 2001:db8:2222:7272::72/64

8.多項選擇題Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serialnumber?()

A.show inventory
B.show flash:filesys
C.dir flash:include chassis
D.show diag
E.show controllers

10.單項選擇題Why will a switch never learn a broadcast address?()

A.Broadcast frames are never sent to swiches.
B.Broadcast addresses use an incorrect format for the switching table.
C.A broadcast address will never be the source address of a frame.
D.Broadcasts only use network layer addressing.
E.A broadcast frame is never forwarded by a switch.

最新試題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字數字是什么?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中需要多少個邏輯地址范圍?()

題型:單項選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:單項選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題

請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()

題型:單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:單項選擇題

路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題