A.show secure
B.show file systems
C.show flash
D.show version
您可能感興趣的試卷
你可能感興趣的試題
A.nly passwords configured after the command has been entered will be encrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will be encrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.
A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1# show swithport port-secure interface FastEthernet 0/12
C.SW1# show port-secure interface FastEthernet 0/12
D.SW1#show running-config
A.默認拒絕所有流量
B.不需要配置到具體端口
C.過濾方向
D.語句的次序
A.172.22.243.127
B.172.22.243.191
C.172.22.243.190
D.10.16.33.98
E.10.17.64.34
F.192.168.1.160
A.1~99
B.100~199
C.1300~1999
D.2000~2699
A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the runningconfiguration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
A.1~99
B.100~199
C.1300~1999
D.2000~2699
A.The switch must be configured with an IP address,subnet mask,and default gateway.
B.The switch must be connected to a router over a VLAN trunk.
C.The switch must be reachable through a port connected to its management VLAN.
D.The switch console port must be connected to the Ethernet LAN.
E.The switch management VLAN must be created and have a membership of at least one switch port.
F.The switch must be fully configured as an SNMP agent.
A.使用策略控制來結合認證、用戶接入和管理員接入對接入安全性進行擴展
B.提供更大的靈活性和機動性、增強的安全性以及用戶生產力增益
C.對所有用戶采用統一的安全策略
D.減少在擴展用戶和管理員對網絡的接入時所需的管理性和運營負擔
最新試題
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
何時必須使用clock rate 命令配置路由器串行接口?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()