單項選擇題The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the command output of both routers, what is the most likely caust of the problem?()

A.Authentication needs to be changed to PAP for both routers.
B.Serial IP addresses of routers are not on the same subnet.
C.Username/password is incorrectly configured.
D.Router names are incorrectly configured.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

Exhibit: Which of the following are true regarding the command output shown in the display (Choose two.)()。

A.There are at least two routers participating in the RIP process.
B.A ping to 192.168.168.2 will be successful.
C.A ping to 10.0.15.2 will be successful.
D.RtrA has three interfaces participating in the RIP process.

4.多項選擇題Which can be done to secure the virtual terminal interfaces on a router?()

A.Administratively shut down the interfaces.
B.Physically secure the interfaces.
C.Configure a virtual terminal password and login process.
D.Enter an access list and apply it to the terminal interfaces using the access-class command.
E.Create an access list and apply it to the terminal interfaces using the access-groupc ommand.

5.多項選擇題At which layers of the OSI model do WANs operate (Choose two.)()。

A.application layer
B.session layer
C.transport layer
D.network layer
E.datalink layer
F.physical layer

6.單項選擇題Which statement is correct regarding the operation of DHCP?()

A.A DHCP client uses a ping to detect address conflicts.
B.A DHCP server uses a gratuitous ARP to detect DHCP clients.
C.A DHCP client uses a gratuitous ARP to detect a DHCP server.
D.If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.
E.If an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.
F.If an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.

7.單項選擇題

根據下圖,哪個選項描述了DLCI 17?()

A.DLCI 17描述了R2和R3之間的ISDN線路
B.DLCI 17描述了一條在R2上的PVC 不能用在R3和R1上
C.DLCI 17是R2使用的二層地址,用來描述一條到R3的PVC
D.DlDLCI 17描述了一條從R2 R3到服務提供商撥號網絡

8.多項選擇題Why does the data communication industry use the layered OSI reference model (Choose two.)()。

A.It divides the network communication process into smaller and simpler components, thus aiding component development, design, and troubleshooting.
B.It enables equipment from different vendors to use the same electronic components, thus saving research and development funds.
C.It supports theevolution of multiple competing standards, and thus provides business opportunities for equipment manufacturers.
D.It encourages industry standardization by defining what functions occur at each layer of the model.
E.It provides a means by which changes in functionality in one layer require changes in other layers.

10.單項選擇題

When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error()。

A.The new IOS image is too large for the router flash memory.
B.The TFTP server is unreachable from the router.
C.The new IOS image is not correct for this router platform.
D.The IOS image on the TFTP server is corrupt.
E.There is not enough disk space on the TFTP server for the IOS image.

最新試題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()

題型:?jiǎn)雾?xiàng)選擇題

在Cisco IOS 設備中,啟動配置文件存儲于何處?()

題型:?jiǎn)雾?xiàng)選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:?jiǎn)雾?xiàng)選擇題