A.VTP allows routing between VLANs.
B.VTP allows a single port to carry information to more than one VLAN.
C.VTP allows physically redundant links while preventing switching loops.
D.VTP allows switches to share VLAN configuration information.

A.FTP
B.Telnet
C.SMTP
D.DNS
E.HTTP
F.POP3

A.NAT protects network security because privat enetworks are not advertised.
B.NAT accelerates the routing process because no modifications are made on the packets.
C.Dynamic NAT facilitates connections from the outside of the network.
D.NAT facilitates end-to-end communication when IPsec is enable.
E.NAT eliminates the need to re-address all host that require extemal access.
F.NAT conserves addresses through host MAC-level multiplexing.

A.to map all the devices on a network.
B.to display the current TCP/IP configuration values.
C.to see how a device MAC address is mapped to its IP address.
D.to see the path a packet will take when traveling to a specified destination.
E.to display the MTU values for each router in a specified network path from source to a destination.

A.point-to-point and multiaccess
B.point-to-multipoint and multiaccess
C.point-to-point and point-to-multipoint
D.nonbroadcast and broadcast multipoint
E.nonbroadcast and broadcast multiaccess

A.denial of service
B.brute force
C.reconnaissance
D.Trojan horse

A.access-list 50 deny 192.168.1.10.0.0.255
B.access-list 110 permit ip any any
C.access-list 2500 deny tcp any host 192.168.1.1 eq22
D.access-list 101 deny tcp any host 192.168.1.1

A.15 seconds
B.30 seconds
C.180 seconds
D.240 seconds

A.It provides dynamic neighbor discovery.
B.It detects unreachable neighbors in 90 second intervals.
C.It maintains neighbor relationships.
D.It negotiates correctness parameters between neighboring interfaces.
E.Ituses timers to elect the router with the fastest links as the designated router.
F.It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF.

A.hub
B.router
C.switch
D.STP
E.subinterfaces
F.VLAN