A.6to4 tunneling
B.VPN tunneling
C.GRE tunneling
D.ISATAP tunneling
E.PPP tunneling
F.Teredo tunneling

A.VTP is disabled on this switch.
B.The switch can create, change, and delete VLANs.
C.The switch learns VLAN information but does not save it to NVRAM.
D.The switch can create VLANs locally but will not forward this information to other switches.
E.The switch learns VLAN information and updates the local VLAN data base in NVRAM.

A.4to6 routing
B.6to4 routing
C.binary routing
D.dual-stack routing
E.NextGen routing

A.16
B.2
C.unlimited
D.4

A.blocking
B.learning
C.disabled
D.forwarding
E.listening

A.Establish a direct link from the switch to all other switches in the network.
B.Assign the switch a higher MAC address than the other switches in the network have.
C.Configure the switch so that it has a lower priority than other switches in the network.
D.Configure the switch for full-duplex operation and configure the other switches for half-duplex operation.
E.Connect the switch directly to the MDF router, which will force the switch to assume the role of root bridge.

A.發送一個單播ARP包到DSL調制解調器/路由器
B.發送一個單播ICMP包到DSL調制解調器/路由器
C.發送三層廣播包到響應的DSL調制解調器/路由器
D.發送一個可以被Host2，the switch，and the DSL modem/router 受到的2層廣播幀

A.Convert all the routers to EIGRP and use 198.133.219.32/27, 198.133.219.64/27, and 198.133.219.92/27 as the new subnetworks.
B.Maintain the use of RIP version 1 and use 198.133.219.32/27, 198.133.219.64/27, and 133.219.92/27 as the new subnetworks.
C.Convert all the routers to EIGRP and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.
D.Convert all the routers to RIP version 2 and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.
E.Convert all the routers to OSPF and use 198.133.219.16/28, 198.133.219.32/28, and 198.133.219.48/28 as the new subnetworks.
F.Convert all the routers to static routes and use 198.133.219.16/28, 198.133.219.32/28, and

A.show session
B.show cdp neighbors
C.show users
D.show queue

A.It is used to validate the sources of VTP advertisements sent between switches.
B.It is used to access the VTP server to make changes to the VTP configuration.
C.It allows two VTP servers to exist in the same domain, each configured with different passwords.
D.It is the password required when promoting a switch from VTP client mode to VTP server mode.
E.It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.