A.Router C will use ICMP to inform Host 1 that Host 2 cannot be reached
B.Router C will use ICMP to inform Router B that Host 2 cannot be reached
C.Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached
D.Router C will send a Destination Unreachable message type
E.Router C will send a Router Selection message type
F.Router C will send a Source Quench message type
您可能感興趣的試卷
你可能感興趣的試題
A.RIPng
B.OSPFv3
C.IS-IS for IPv6
D.static
A.hello packets
B.SAP messages sent by other routers
C.LSAs from other routers
D.beacons received on point-to-point links
E.routing tables received from other link-state routers
F.TTL packets from designated routers
A.Each OSPF area requires a loopback interface to be configured.
B.Areas may be assigned any number from 0 to 65535.
C.Area 0 is called the backbone area.
D.Hierarchical OSPF networks do not require multiple areas.
E.Multiple OSPF areas must connect to area 0.
F.Single area OSPF networks must be configured in area 1.
A.transparent
B.auto
C.on
D.desirable
E.blocking
F.forwarding
A.amount of RAM
B.bridge priority
C.IOS version
D.IP address
E.MAC address
F.speed of the links
A.dataintegrity
B.encryption
C.keyexchange
D.authentication
A.FTP
B.Telnet
C.SMTP
D.DNS
E.HTTP
F.POP3
A.127.0.0.0
B.127.0.0.1
C.224.0.0.9
D.126.0.0.1
E.127.0.0.121
A.IP
B.X.25
C.Ethernet
D.Frame-relay
最新試題
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
要將數據包發送到遠程網絡,應使用哪種設備?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()