A.Onl ypasswords configured afte rthe command has been entered will be encrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will be encrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.
您可能感興趣的試卷
你可能感興趣的試題
A.用于檢查網管工作是否正常
B.用于檢查網絡連接是否可通
C.用于分析網絡在哪里出現了問題
A.It creates a VLAN 999 interface.
B.It designates VLAN 999 for untagged traffic.
C.It blocks VLAN 999 traffic from passing on the trunk.
D.It designates VLAN 999 as the default for all unknown tagged traffic.
A.在終端設備之間傳送比特流
B.建立、維護虛電路,進行差錯校驗和流量控制
C.定義電壓、接口、線纜標準、傳輸距離等特性
A.190.0.0.0
B.190.233.0.0
C.190.233.27.0
D.190.233.27.1
A.網絡地址和主機地址
B.主機地址和網絡掩碼
C.網絡地址和網絡掩碼
A.ISO
B.ITU
C.IETF
D.IEEE
A.VLANs establish broadcast domains in switched networks.
B.VLANs utilize packet filtering to enhance network security.
C.VLANs provide a method of conserving IP addresses in large networks.
D.VLANs provide a low-latency internetworking alternative to routed networks.
E.VLANs allow access to network services based on department, not physical location.
F.VLANs can greatly simplify adding, moving, or changing hosts on the network.
A.RIP
B.BGP
C.OSPF
D.EIGRP
A.線纜,如光纖、雙絞線、同軸電纜等
B.集線器
C.MODEM
D.路由器
A.網絡互聯
B.網絡分層
C.七層模型
D.制定標準
最新試題
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€廣播域?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()